BESTÅ + MORIK Wireless Charging Station

IKEA Hackers logo




Cable Management BESTA wireless charging station-6

Published on September 29th, 2016 | by Contributor

Ikea Items used: BESTÅ unit (1200 x 400 x 740), MORIK Wireless Charger, GLIS box with lid (optional)

BESTA wireless charging station-1

As part of a wider plan to redecorate my lounge in August of this year, I decided I wanted to add a charging station (including wireless charging pad) to satisfy the growing number of devices in my house which regularly need charging. IKEA currently offers a number of lamps and bedside tables which contain wireless charging pads – none of these I felt were appropriate for my lounge so instead I decided to buy the MORIK wireless charging unit. The description of the MORIK suggests it needs to be completed with a SELJE or NORDLI bedside table, but I intended to install it on my existing BESTÅ  unit (which has been pressed into service as a TV unit).

BESTA wireless charging station-2

First drill a 56mm diameter hole in the top of the BESTÅ unit (I set the hole at 200mm from each edge of the BESTÅ to avoid existing screws and support strips).

BESTA wireless charging station-3

Once I had drilled my hole it became apparent why Ikea recommend the MORIK only be used with the suggested pieces of furniture. The charging pad was sat too deep in the top of the BESTÅ unit to do any charging whatsoever (I already knew this would be the case as I had previously measured the depth of the unit).

BESTA wireless charging station-4

To get the MORIK to work I would have to cut away the underside of the existing unit – this proved easy as the unit top is hollow and the material used to make the underside was thin enough to be cut with a very sharp Stanley knife (watch your fingers!). Once the shape was cut (and the cardboard webbing removed) I padded out the inside with some offcuts of 18mm skirting board, inserted the MORIK unit and attached it to the skirting board offcuts with some 15mm screws.

BESTA wireless charging station-6

The finished result looks great, a wireless charger which sits seamlessly in my unit underneath my wall-mounted TV. The MORIK also has an in built USB port underneath it which is still accessible from within the BESTÅ unit – I complimented this with a GLIS box full of USB cables for charging devices that currently don’t have wireless charging.

BESTA wireless charging station-5

~ by murfilicious

The Author

Contributor This post was contributed by a reader. Please see credits at the end of the post. To submit your own hack, please click here.

Back to Top ↑

  • Recommended for you

  • HACK OF THE YEAR

    HACK OF THE YEAR

  • View all: Posts in chronological order |
    Hacks of the Year | Ideas of the Year

    Support IKEAHackers! .



IKEA Hackers

Leave a Reply

Your email address will not be published. Required fields are marked *